Blasting systems from AGTOS

Wire mesh conveyor shot blast machines

Technical data

Possible applications for AGTOS wire mesh conveyor shot blast machines (type BS)

Wire belt blast machines can be used very flexibly. The fact that the workpieces can be blasted simultaneously from above and below considerably expands the range of workpieces that can be processed. Wire belt blast machines are used, for example, for deburring, descaling and cleaning cast and laser-cut parts. We are often asked whether the wire belt leaves a shadow on the workpiece surfaces. We have developed ways of at least largely avoiding this. These machines can be optimally integrated into a flow production system. We offer a range of turnover devices for emptying the workpieces. AGTOS has established a unique selling point in the machining of aluminium workpieces. Benefit from our experience!

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information

Unblock content Accept required service and unblock content

Technical data

Wire mesh conveyor shot blast machines Product programme

Our standard program for wire belt blast machines includes throughput widths from 600 mm to 1600 mm.

The determination of the suitable machine concept depends, among other things, on your workpieces, the required surface, the available halls, the required performance and, last but not least, your ideas regarding an optimal production process. If the task cannot be solved with a standard machine, we will develop a customized machine concept for you.

Type:		BS06-05	BS10-05	BS10-05	BS16-05	BS16-05	BSXX-XX
Number of high-performance turbines	pcs.	4	4	8	4	8	Nothing suitable? We would be happy to develop a customised solution with you.
Max. workpiece width	mm	600	1000	1000	1600	1600
Max. workpiece height	mm	500	500	500	500	500
Throughput speed	m/Min	depending on the blasting task

How it works

Operating sequence for wire mesh conveyor shot blast machines

The diagram on the left shows the path of the workpieces through the AGTOS blasting system. You can count on us to always consider the optimal solution for your workpiece. In doing so, we take into account the factors of time, cost and material. This is how you optimise your production.

The workpieces actuate the switching threshold located in front of the inlet sluice for the automatic blast media supply of the running high-performance turbines. This ensures that blasting only takes place when workpieces are in the blasting area.

The inlet sluice is equipped with wear-resistant rubber curtains for sealing. After passing through the blast zone, the workpieces are conveyed to the blow-off device. The abrasive remaining on the workpiece surfaces is returned to the abrasive circuit here.

The abrasive keeps circulating and is cleaned to allow continuous use. Via the abrasive dosing device the cleaned abrasives, coming from the abrasive silo, arrives at the high performance turbines.

A fan generates the necessary negative pressure for dust-free operation of the blasting systems. The extracted air is cleaned with a filter system.